Calibration Targets


Calibration Targets


The instruments use calibration targets, including a sundial, to determine accurate colors, brightnesses, and other information collected by the instruments.
Calibration Targets
Calibration Targets Info


Tech Specs


  • MAIN JOB:Objects with known properties that act as reference points to help scientists fine-tune observations not only from imagers but also other science instruments.

  • LOCATION: Pancam calibration target is in the shape of a sundial mounted on the rover deck.

    Mössbauer Spectrometer calibration target is a thin slab of rock rich in magnetite mounted under the rover solar panels (it can also be used by the APXS).

    APXS calibration target is on the inside of its dust doors.

    Mini-TES has an internal target located in the Pancam Mast Assembly as well as an external target on the deck of the rover near the low-gain antenna.

  • FUNCTION:The colored blocks in the corners are used to calibrate the color in images of the Martian landscape. Pictures of the shadows that are cast by the sundial's center post allow scientists to properly adjust the brightness of each Pancam image. Measurements of the calibration targets of the Mössbauer, APXS, and Mini-TES help verify that the instruments are working properly.

Calibration Targets

When you adjust the color on your television set, you do so by picking something on the screen that you know should be a certain color (such as grass should be green) and you adjust your set accordingly. This is a form of calibration. You used the color of the grass as a reference point. Instruments that go to Mars also need to be calibrated so that scientists receive accurate information. There has to be a known reference -- a calibration target.


Calibration Targets

The rover's calibration targets are objects with known properties. For example, the Mössbauer Spectrometer's calibration target is a thin slab of rock that is rich in magnetite. The APXS also uses another reference point on the inside of its dust doors. When these doors are closed, they protect the APXS sensor head from martian dust and offer a calibration target on their interior surfaces. Mini-TES has an internal target located in the Pancam Mast Assembly as well as an external target on the deck of the rover.

The Pancam calibration target is, by far, the most unique the rover carries. It is in the shape of a sundial and is mounted on the rover deck. Pancam will image the sundial many times during the mission so that scientists can adjust the images they receive from Mars. They use the colored blocks in the corners of the sundial to calibrate the color in images of the martian landscape. Pictures of the shadows that are cast by the sundial's center post allow scientists to properly adjust the brightness of each Pancam image. Children provided artwork for the sides of the base of the sundial.